AMAADOR ACADEMYCertificatesVerify a certificate

PRO-CIH

Final check — CIH — Certified Industrial Hygienist (Exam-Prep)

Answer the 180 questions. You need 80% or more to pass. You can retry as many times as you like.

Study the course →

Question 1An industrial hygienist collects a personal sample for respirable crystalline silica using a cyclone pre-selector connected to a 37-mm PVC filter cassette. What is the primary function of the cyclone in this train?
Question 2A cyclone designed to match the respirable convention must be operated at a specific flow rate (e.g., 2.5 L/min for an aluminum cyclone). If the pump flow drifts upward during sampling, what is the most likely effect on the collected sample?
Question 3Before and after an 8-hour sampling shift, a pump is calibrated against a primary standard. The IH should use which device as the primary flow standard?
Question 4An IH samples a solvent vapor on a coconut-shell charcoal tube at 100 mL/min. During analysis, the lab reports significant analyte on the backup section relative to the front. This finding most directly indicates:
Question 5A direct-reading photoionization detector (PID) is used to screen for VOCs. A PID will NOT respond to a compound when:
Question 6A combustible gas indicator (catalytic bead LEL meter) is being used in an atmosphere suspected of oxygen deficiency. The most important limitation to recognize is that:
Question 7An IH must select a filter for gravimetric analysis of total particulate where the sample mass will be very small. Which filter property is most important to minimize weighing error?
Question 8A length-of-stain colorimetric detector tube is used to measure a gas concentration. A key accuracy limitation of these tubes is that:
Question 9A passive (diffusive) organic vapor badge relies on Fick's law of diffusion. Compared to an active charcoal tube, a critical requirement unique to the diffusive sampler is:
Question 10An IH samples airborne lead on a mixed cellulose ester (MCE) filter. MCE is chosen for metals primarily because:
Question 11During asbestos sampling by NIOSH 7400 (PCM), the air sample is collected on a 25-mm MCE filter with a conductive cowl. Why is an open-face cassette with a conductive (carbon) cowl specified?
Question 12An IH needs to determine the minimum air volume to collect for a contaminant with an analytical limit of detection (LOD). The minimum volume should be chosen so that:
Question 13An IH collects an 8-hour sample on a charcoal tube but the contaminant is known to have poor desorption recovery in carbon disulfide. The most appropriate corrective action is to:
Question 14A real-time aerosol photometer (light-scattering nephelometer) reads mg/m3 but was factory-calibrated to Arizona road dust. To report accurate mass for a workplace aerosol, the IH should:
Question 15An IH must measure both vapor and aerosol phases of a semi-volatile pesticide simultaneously. Which sampling configuration is most appropriate?
Question 16A rotameter (variable-area flowmeter) is used as a secondary field standard. Its reading is most strongly affected by changes in:
Question 17An IH reports a TWA exposure from a sample collected at standard pump flow. The lab provides mass (ug). To compute the airborne concentration the IH divides the analyte mass by:
Question 18A high-volume area sample for a metal fume is collected, but the pump used a critical orifice for flow control. The advantage of a critical (sonic) orifice in the sampling train is that it:
Question 19An industrial hygienist must analyze a charcoal tube sample for a non-polar organic solvent vapor. Which laboratory technique is most appropriate for separating and quantifying the desorbed analyte?
Question 20A lab uses carbon disulfide to desorb a charcoal tube. The desorption efficiency is reported as 0.85. If 12 micrograms of analyte are measured in the eluate, what mass was actually collected on the sorbent?
Question 21An analyst needs to measure trace lead in an air filter digest. Which instrumental method offers element-specific quantification of metals at low concentrations?
Question 22A respirable crystalline silica sample is analyzed by X-ray diffraction. The principle that allows identification of the quartz phase is based on:
Question 23Beer-Lambert law relates absorbance to concentration. If a solution's absorbance doubles while path length and molar absorptivity stay constant, the concentration has:
Question 24A buffer solution resists pH change. An industrial hygienist preparing a buffer at pH equal to the acid's pKa should expect the ratio of conjugate base to weak acid to be:
Question 25During NIOSH 7500 silica analysis, a known mass of analyte gives a calibration response. The slope of the calibration curve is used to:
Question 26An analytical method reports a limit of detection (LOD) and limit of quantification (LOQ). The LOQ is typically defined relative to the standard deviation of the blank as:
Question 27A hygienist converts a benzene concentration from ppm to mg/m3 at NTP (25 C, 760 mmHg). The conversion requires which property of the substance?
Question 28At 25 C, a vapor concentration of 1 ppm corresponds to mg/m3 using the factor MW/24.45. For a compound with molecular weight 48.9 g/mol, 1 ppm equals approximately:
Question 29An analyst suspects a sample matrix interference is biasing results. The most rigorous quantification technique to compensate for matrix effects is:
Question 30Asbestos fibers on a filter are counted by phase contrast microscopy (PCM). PCM enhances the visibility of transparent fibers primarily by:
Question 31A first-order chemical reaction has a rate that depends on concentration. If the half-life of a first-order degradation is 30 minutes, after 90 minutes the fraction of original substance remaining is:
Question 32A hygienist evaluates a colorimetric detector tube. The chemical reaction producing the color stain length is best described as a:
Question 33In mass spectrometry, a compound is identified by its fragmentation pattern. The x-axis of a mass spectrum represents:
Question 34A solution is prepared by dissolving 0.1 mole of a strong monoprotic acid in 1 liter of water. Assuming complete dissociation, the pH is approximately:
Question 35An infrared (IR) spectrum is used to identify functional groups in an organic compound. IR absorption occurs because molecular bonds:
Question 36A quality control program tracks analytical accuracy and precision. A method that consistently reads 8% above the true value but with tight repeatability is best described as having:
Question 37A cohort study follows 500 welders and 500 office workers for fumes-related respiratory disease. Over 10 years, 60 welders and 20 office workers develop the disease. What is the relative risk (risk ratio) for welders?
Question 38An industrial hygienist computes a 95% confidence interval for the mean exposure as 0.8 to 1.4 mg/m3. Which interpretation is correct?
Question 39Airborne contaminant concentrations across many workplace samples are typically best described by which distribution?
Question 40A case-control study of bladder cancer and dye exposure yields the following: exposed cases 40, unexposed cases 10, exposed controls 20, unexposed controls 80. What is the odds ratio?
Question 41In quantitative cancer risk assessment, the slope factor is used to estimate which of the following?
Question 42A diagnostic screening test for an occupational disease has high sensitivity but low specificity. What is the most likely consequence?
Question 43Which measure expresses the number of NEW cases of disease arising in a population over a defined time period?
Question 44A study finds an association between solvent exposure and liver disease, but workers exposed to solvents also drink more alcohol, which independently causes liver disease. Alcohol here is best described as a:
Question 45A standardized mortality ratio (SMR) of 150 for a worker cohort indicates:
Question 46In noncancer risk assessment, the Reference Dose (RfD) is typically derived by dividing the NOAEL by which factors?
Question 47A type I error in hypothesis testing occurs when an investigator:
Question 48When sampling data are lognormally distributed, which central tendency measure best estimates the typical (most representative) exposure?
Question 49Which epidemiologic study design is best suited to investigate a rare disease with a long latency period?
Question 50The four primary steps of human health risk assessment as defined by the National Research Council (NRC) are hazard identification, dose-response assessment, exposure assessment, and:
Question 51If a contaminant has an inhalation unit risk of 1.5 x 10^-3 per (ug/m3) and lifetime exposure is 2 ug/m3, the estimated excess lifetime cancer risk is approximately:
Question 52A hazard quotient (HQ) calculated for a noncarcinogen equals 0.4. What does this indicate?
Question 53Eight personal samples for a contaminant yield values (mg/m3): 2, 4, 4, 6, 8, 10, 12, 14. What is the arithmetic mean?
Question 54In a dose-response curve, what does the term 'threshold' refer to for a noncarcinogenic effect?
Question 55A hospital industrial hygienist is selecting respiratory protection for healthcare workers caring for a patient with suspected tuberculosis in an airborne infection isolation room. Which respirator is the minimum acceptable choice?
Question 56During a sewage treatment plant survey, the IH must classify the biological agent risk. Endotoxin exposure in this setting is primarily associated with which type of microorganism?
Question 57A laboratory works with a pathogen that can cause serious disease but for which effective treatment and preventive measures are available, with low risk of community spread. Which biosafety level is appropriate?
Question 58An IH investigates a water-damaged office building where occupants report respiratory complaints. Which sampling approach best characterizes airborne fungal exposure relative to outdoor reference levels?
Question 59A primary route of transmission for bloodborne pathogens such as HIV and Hepatitis B in occupational settings is:
Question 60Legionella pneumophila proliferation in a building is most strongly favored by which water system condition?
Question 61An IH must control aerosol generation while pipetting infectious material. The most effective engineering control is:
Question 62Hypersensitivity pneumonitis (e.g., Farmer's lung) results primarily from repeated inhalation of:
Question 63Following a needlestick exposure to a known Hepatitis B source, the most important immediate post-exposure consideration for an unvaccinated worker is:
Question 64Which biological agent classification group (per WHO/risk-group framework) corresponds to an agent that poses high individual and high community risk, often with no available treatment?
Question 65An IH samples for airborne endotoxin in a cotton textile mill. The most appropriate analytical method is:
Question 66Byssinosis, characterized by chest tightness on the first day back to work after a break, is associated with exposure to:
Question 67A Class II Type A2 biological safety cabinet protects the worker, the product, and the environment primarily by:
Question 68For an agricultural worker exposed to grain dust, the bioaerosol component most directly linked to acute febrile reactions (organic dust toxic syndrome) is:
Question 69When designing a decontamination protocol for surfaces potentially contaminated with bacterial spores (e.g., Bacillus anthracis), the IH should specify a disinfectant that is:
Question 70An IH evaluates a metalworking fluid system where workers report respiratory symptoms. The microbial hazard of greatest concern from contaminated water-based metalworking fluids is:
Question 71In a hierarchy of controls for a biosafety lab handling aerosol-transmissible agents, which represents the highest-priority (most effective) control category?
Question 72A worker performs reprocessing of flexible endoscopes and is exposed to a high-level disinfectant. Beyond the chemical hazard, the biohazard rationale for high-level disinfection is to:
Question 73A general exhaust ventilation system dilutes a solvent vapor throughout a 1,000 m³ room. The contaminant generation rate is constant and the room air is well-mixed. Compared with local exhaust ventilation (LEV) capturing at the source, this dilution approach is generally LEAST appropriate when:
Question 74For a simple plain (unflanged) round duct opening acting as a capture hood in free space, the centerline velocity follows V = Q / (10X² + A), where X is the distance from the hood face. Adding a flange to the same opening primarily:
Question 75An LEV hood requires a capture velocity of 100 ft/min at a point 6 inches from a plain round opening of area 0.5 ft². Using V = Q/(10X² + A), the required volumetric flow rate Q is approximately:
Question 76In a ventilation system, the velocity pressure (VP), static pressure (SP), and total pressure (TP) at a point in a duct are related by:
Question 77Air at standard conditions flows in a duct where the measured velocity pressure is 1.0 in. w.g. Using V = 4005 × √VP (ft/min), the transport velocity is approximately:
Question 78A duct transporting wood dust must maintain a minimum transport (conveying) velocity to prevent settling and plugging. The PRIMARY reason a minimum transport velocity is specified for particulate-laden ducts rather than vapors/gases is that:
Question 79A laboratory chemical fume hood is operating with a face velocity of 60 ft/min. An industrial hygienist observes that a worker frequently walks rapidly past the open sash. The most likely consequence of this cross-draft relative to the hood's performance is:
Question 80Two ventilation branches join at a duct junction. To balance the system by design (the static-pressure balance method) without using blast gates, the IH should ensure that:
Question 81A centrifugal fan is operating in a fixed ventilation system. According to the fan laws, if the fan speed (rpm) is increased by 25% (factor 1.25), the volumetric flow rate Q will change by a factor of approximately:
Question 82Using the fan laws for the same fan with a 25% increase in speed (factor 1.25), the fan static pressure (SP) requirement will increase by a factor of approximately:
Question 83Continuing with the same fan at a 25% speed increase (factor 1.25), the brake horsepower (BHP) drawn by the fan will increase by a factor of approximately:
Question 84A makeup (replacement) air system is required when a large LEV system exhausts a high volume from a building. If insufficient makeup air is provided, the most likely problem the IH will observe is:
Question 85An IH must select a hood for a degreasing tank with an open surface emitting solvent vapor that is denser than air. The most effective LEV hood configuration for a wide open-surface tank, where overhead canopy hoods are discouraged, is typically:
Question 86A slot hood (plenum) is used for lateral exhaust. The slot itself is designed with a relatively high velocity (around 2,000 ft/min) primarily to:
Question 87A particulate control device must remove fine respirable dust (<2.5 µm) at high efficiency from an exhaust stream before discharge. Among common air-cleaning devices, the one generally providing the HIGHEST collection efficiency for sub-micron particles is:
Question 88An IH measures a duct velocity pressure with a pitot tube and finds it varies across the duct cross-section. To obtain a representative average duct velocity, the IH should:
Question 89A canopy hood is positioned above a hot process tank. Because the source is buoyant (hot), the canopy hood design must account for a rising thermal plume. The required exhaust volume for a hot-process canopy is governed primarily by:
Question 90An IH evaluates an existing LEV system and finds the actual hood static pressure (SPh) is significantly lower in magnitude than the design value. Assuming the hood entry loss factor is unchanged, this most likely indicates:
Question 91An industrial hygienist evaluates a manual lifting task using the NIOSH Revised Lifting Equation. The worker lifts a 16 kg box. After computing the Recommended Weight Limit (RWL) as 8 kg, what is the Lifting Index (LI), and what does it indicate?
Question 92In the NIOSH Lifting Equation, what is the value of the Load Constant (LC) representing the maximum recommended weight under ideal conditions?
Question 93A worker performs repetitive wrist flexion at a workstation. Which musculoskeletal disorder is most directly associated with compression of the median nerve at the wrist?
Question 94An ergonomist assesses an assembly task with awkward upper-limb postures and high repetition. Which observational tool is specifically designed to evaluate the upper limbs (RULA)?
Question 95A standing assembly operator reaches frequently to a bin located at shoulder height. Applying anthropometric design principles, the reach distance for shelf access should be designed for which percentile?
Question 96When designing a clearance dimension such as a doorway or legroom under a desk, which anthropometric design principle should be applied?
Question 97A hygienist measures whole-body vibration exposure for a forklift operator. Which standard provides the primary basis for evaluating human exposure to whole-body vibration?
Question 98A grinding tool operator is exposed to hand-arm vibration over an 8-hour shift. Chronic hand-arm vibration exposure is most associated with which condition?
Question 99A physically demanding task requires a worker to expend significant energy. Which physiological measure is most commonly used to estimate metabolic workload during ergonomic evaluation?
Question 100An ergonomist uses the Snook (Liberty Mutual) tables to evaluate a manual material handling task. What do these tables primarily provide?
Question 101A seated VDT (computer) operator reports neck and shoulder strain. According to ergonomic guidelines, the top of the monitor screen should be positioned approximately:
Question 102In evaluating localized muscle fatigue from sustained static exertion, which factor most increases the risk of fatigue and reduced blood flow to the muscle?
Question 103A hygienist applies the most effective control to reduce a repetitive-strain hazard at a packing line. According to the hierarchy of controls, which is the preferred ergonomic intervention?
Question 104The REBA (Rapid Entire Body Assessment) tool differs from RULA primarily in that REBA:
Question 105In the NIOSH Lifting Equation, the Frequency Multiplier (FM) accounts for which task variable?
Question 106A worker frequently performs lifts with the load held far from the body. In the NIOSH equation, increasing the horizontal distance (H) has what effect on the Horizontal Multiplier and the RWL?
Question 107An ergonomist recommends a sit-stand workstation and adjustable chair to reduce prolonged static loading. This approach best reflects which ergonomic design philosophy?
Question 108A hygienist evaluates hand-arm vibration and needs the standard governing measurement and assessment of human exposure to hand-transmitted vibration. Which standard applies?
Question 109A worker is exposed to 88 dBA for 8 hours under the OSHA PEL with a 5-dB exchange rate and 90 dBA criterion. What is the worker's noise dose?
Question 110Using the ACGIH 3-dB exchange rate with an 85 dBA TLV for 8 hours, what continuous exposure level is permitted for only 2 hours?
Question 111Two independent machines each produce 85 dBA at a worker's position. What is the combined sound pressure level when both operate?
Question 112An employee's noise dose is measured at 200% over an 8-hour shift using OSHA parameters. What is the 8-hour time-weighted average?
Question 113A point sound source produces 100 dB at 1 meter in a free field. What is the expected level at 4 meters from the source?
Question 114An audiometric program detects a standard threshold shift (STS) under OSHA. By how much must hearing thresholds change relative to baseline to qualify?
Question 115A hearing protector has a labeled NRR of 27 dB. Per OSHA's method for estimating real-world A-weighted attenuation, what derated attenuation is applied to a TWA in dBA?
Question 116A gamma source reads 80 mR/hr at 2 meters. Using the inverse-square law, what is the approximate dose rate at 1 meter?
Question 117Which type of ionizing radiation has the greatest mass and charge but the lowest penetrating ability, being stopped by a sheet of paper or skin?
Question 118A radioisotope has a half-life of 8 days. After 24 days, what fraction of the original activity remains?
Question 119Under the U.S. NRC, what is the annual occupational total effective dose equivalent (TEDE) limit for an adult radiation worker?
Question 120Which control is the most effective primary strategy for limiting external dose from a fixed gamma-emitting source in a workplace?
Question 121A laser is classified by its potential to cause eye injury. Which IEC/ANSI laser class can cause eye damage from specular and diffuse reflections and skin burns, requiring strict controls?
Question 122Which region of the non-ionizing electromagnetic spectrum is most strongly associated with cataract formation and skin erythema, and is emitted by welding arcs?
Question 123The primary biological effect of exposure to radiofrequency and microwave radiation at non-ionizing frequencies is best described as:
Question 124A sound level meter is set to which frequency weighting to best approximate the human ear's response for evaluating occupational noise exposure?
Question 125Noise-induced hearing loss characteristically first appears as a notch in the audiogram at which frequency region?
Question 126To compare the relative loudness contribution of low-frequency versus overall noise (e.g., to assess if hearing protection is feasible), an IH compares which two measurements?
Question 127A foundry worker performs heavy manual tasks. Industrial hygiene sampling shows WBGT = 30°C and the work-rest regimen follows ACGIH TLVs. According to ACGIH, what is the primary physiological variable the WBGT index is designed to limit?
Question 128The WBGT index for an OUTDOOR setting with solar load is calculated from natural wet-bulb, globe, and dry-bulb temperatures. What is the correct weighting?
Question 129A worker in a cold-storage warehouse at -25°C reports numbness in fingers. Which heat-transfer mechanism is most directly responsible for the rapid local tissue cooling causing frostbite from contact with metal surfaces?
Question 130In assessing toxicity, a chemical has an LD50 of 5 mg/kg orally in rats. According to standard hazard classification, this substance is best described as:
Question 131A worker is exposed to carbon tetrachloride. This solvent is a classic example of a hepatotoxin acting via a metabolite. Which best describes its mechanism?
Question 132An IH must decide which heat strain physiological monitoring criterion to apply per ACGIH. For acclimatized workers, sustained heart rate should not exceed which value as a screening criterion (recovery HR one minute after peak work)?
Question 133A dose-response curve is plotted. The slope of the linear portion of the curve provides information primarily about:
Question 134Two chemicals are present together. Chemical A alone produces an effect of 2 and chemical B alone produces an effect of 3, but together they produce an effect of 20. This interaction is termed:
Question 135A chemical that has NO toxic effect by itself but greatly increases the toxicity of a second chemical when given together demonstrates:
Question 136During heat acclimatization, the body adapts over 1-2 weeks. Which of the following is a hallmark physiological adaptation of an acclimatized worker?
Question 137A worker collapses with hot, dry skin, confusion, and a core temperature of 41°C. This is a medical emergency. The condition and correct first action are:
Question 138Biological monitoring for a heavy metal uses a biomarker. For inorganic lead exposure, which biological exposure index (BEI) determinant does ACGIH specify as the primary one?
Question 139A substance is classified as a teratogen. The MOST critical determinant of whether a teratogenic effect occurs is:
Question 140An engineering control is proposed for a hot process: a reflective shield placed between a furnace and workers. Which heat-transfer route is this control primarily intended to reduce?
Question 141A solvent exhibits first-order elimination kinetics with a biological half-life of 4 hours. After a single exposure, approximately what fraction remains in the body after 12 hours?
Question 142When humidity is very high and ambient temperature exceeds skin temperature, which avenue of body heat loss becomes ineffective, dramatically raising heat-stress risk?
Question 143Carbon monoxide is a chemical asphyxiant. Its primary toxic mechanism is:
Question 144An IH selects a target organ classification for a pneumoconiosis-causing dust such as crystalline silica. The principal target organ and effect are:
Question 145A foundry pours molten iron into sand molds. Which airborne hazard is MOST characteristic of the shakeout and sand-handling operations in this process?
Question 146In an electroplating shop, chromium plating tanks generate a mist that escapes the tank surface. Which control is the recognized primary engineering control for hexavalent chromium tank emissions?
Question 147A worker uses a stick (SMAW) welder on mild steel painted with a zinc-rich primer in a confined tank. Which acute condition is MOST associated with this exposure?
Question 148In a grain elevator, dust accumulates throughout the headhouse. Beyond inhalation exposure, what is the PRIMARY catastrophic hazard the industrial hygienist must address?
Question 149A petroleum refinery has a hydrodesulfurization unit. Which gas, generated by removing sulfur from crude fractions, is the chief acute inhalation hazard during a leak?
Question 150In a furniture spray-finishing booth, isocyanate-based two-component polyurethane coatings are applied. Which health concern is the principal driver for exposure controls?
Question 151A semiconductor fab uses hydrofluoric acid for wafer etching. Beyond corrosive burns, what systemic effect makes HF particularly dangerous and dictates calcium gluconate availability?
Question 152A pulp and paper mill uses the kraft process. Which characteristic odorous emission stream of reduced sulfur compounds is associated with this process?
Question 153During abrasive blasting of a steel structure, the IH must evaluate the abrasive media itself. Which traditional blasting medium poses the greatest silicosis risk and is widely restricted?
Question 154A battery manufacturing plant produces lead-acid batteries. Which operation typically generates the HIGHEST airborne lead exposures requiring stringent controls?
Question 155In a meat-packing plant, ammonia is used as the refrigerant. Which property of anhydrous ammonia most influences emergency response planning for a release?
Question 156A cotton textile mill processes raw cotton in opening and carding areas. Workers report chest tightness worse on the first day back after a weekend. This is characteristic of:
Question 157A chrome ore and ferroalloy smelter operates electric arc furnaces. Which airborne contaminant from the high-temperature reduction process is a primary respiratory carcinogen concern?
Question 158An underground hard-rock mine uses diesel-powered loaders. Besides diesel particulate, which gas accumulating in poorly ventilated headings is a leading acute asphyxiation/toxicity concern?
Question 159A commercial bakery uses large quantities of flour in mixing operations. Which occupational disease is the principal concern from chronic flour-dust and enzyme inhalation?
Question 160In a rubber tire manufacturing plant, the curing (vulcanization) press area is evaluated. Which exposure class, generated when rubber compounds are heated, is the principal IH concern?
Question 161A spray-painting line cures coatings in a gas-fired oven where solvents flash off. To prevent fire and ensure worker safety, ventilation must keep solvent vapor concentrations below what threshold?
Question 162A wastewater treatment plant operator must enter a digester sump. Which combination of confined-space atmospheric hazards is MOST characteristic of this environment?
Question 163A new IH program manager is establishing a written respiratory protection program at a manufacturing plant. Under the OSHA standard, which element is REQUIRED before an employee may be fit-tested and assigned a respirator?
Question 164Under the OSHA Hazard Communication Standard (HazCom 2012, aligned with GHS), how many sections must a compliant Safety Data Sheet (SDS) contain, in a standardized order?
Question 165An IH is reviewing a chemical label and notes the GHS signal word 'DANGER'. What does this signal word indicate relative to 'WARNING'?
Question 166A facility wants to prioritize its IH sampling resources across many similar exposure groups (SEGs). Which approach best supports a defensible, risk-based prioritization of monitoring effort?
Question 167Under HazCom 2012, who has the primary responsibility for classifying the hazards of a chemical and preparing the original Safety Data Sheet?
Question 168An IH manager is justifying the IH program budget to senior leadership. Which framework most directly demonstrates the financial value of preventing occupational illness?
Question 169During an audit, an IH finds secondary containers of a solvent transferred from labeled drums into spray bottles used and emptied within one shift by the employee who filled them. Under HazCom, what labeling is acceptable?
Question 170A corporation operates in the U.S. and several other countries and wants one global IH management system. Which voluntary consensus standard provides a framework for an occupational health and safety management system?
Question 171An IH program uses the OSHA HazCom pictogram showing a person with a star/asterisk burst on the chest (the 'health hazard' pictogram). Which hazard class is this pictogram specifically associated with?
Question 172In the hierarchy of controls applied within an IH program, which control type is considered the MOST effective and should be evaluated first?
Question 173An employer revises its HazCom written program. Within the program, employee training on a NEWLY introduced physical or health hazard must be provided at what point?
Question 174An IH is selecting an occupational exposure limit (OEL) for a substance that has both an OSHA PEL and an ACGIH TLV, where the TLV is substantially lower. From a program-management and professional-practice standpoint, which is the most protective course of action?
Question 175A multi-employer construction site has several contractors. Under HazCom, what is each employer's obligation regarding hazardous chemicals their workers may be exposed to from other contractors?
Question 176An IH program manager is developing key performance indicators. Which of the following is a LEADING (proactive) indicator rather than a lagging indicator?
Question 177Under the OSHA HazCom Standard, the written hazard communication program must include all of the following EXCEPT:
Question 178An IH is establishing a sampling strategy and must decide on the number of samples per SEG. According to widely used IH statistical guidance (e.g., AIHA), what is a commonly recommended minimum number of random samples to characterize an exposure profile for a SEG?
Question 179A company assigns AIHA exposure assessment ratings. An exposure judged to be between 50% and 100% of the OEL would typically be placed in which exposure rating category?
Question 180An IH program manager wants to ensure controls remain effective over time after installation of a local exhaust ventilation system. Which program element best provides this assurance?