AMAADOR ACADEMYCertificatesVerify a certificate

MEWP

Final check — Mobile Elevating Work Platforms (MEWP) Safety

Answer the 24 questions. You need 80% or more to pass. You can retry as many times as you like.

Study the course →

Question 1Under NF EN 280-1, what makes a MEWP a group B machine?
Question 2A contractor arrives with a valid training card for scissor lifts and is given a model he has never used. What does he still need before operating?
Question 3Under LOLER 1998 in Great Britain, how often must equipment used to lift people be thoroughly examined, unless a written scheme applies?
Question 4A supervisor asks a cleaner who has never been trained to use a scissor lift to hang decorations because the trained operator is off sick. In the 2025 Bury case, what did HSE say about access to such platforms?
Question 5You must change a light fitting above a row of fixed machines. You cannot park directly beneath it. Which machine is most suitable?
Question 6Where do you find the maximum wind speed allowed for a particular MEWP?
Question 7Your team is planning a week of work from a boom lift on a facade. The draft plan says: in an emergency, call the fire service. What is wrong with this?
Question 8A scissor lift will work along a shop front on a busy pavement. Which set-up best protects the public?
Question 9What is the main difference between the pre-use check and the thorough examination (or VGP)?
Question 10During the function test the ground controls will not lower the platform, but the platform controls work perfectly. What should you do?
Question 11On the walk-round you find the platform entry gate has been tied open with cable ties. A colleague says it is quicker for loading. What is the right action?
Question 12Why are the ground controls tested first in the daily function test?
Question 13Two operators with a toolbox and a box of fittings step onto a small scissor lift, and the overload alarm sounds. What should they do?
Question 14In a boom-type MEWP, what fall protection does HSE and IPAF guidance call for?
Question 15You are driving a self-propelled scissor lift raised along a warehouse aisle. Ahead, a floor drain cover sits slightly lower than the floor. What is the safe action?
Question 16A sign fitter wants to lift a 2 m x 1 m advertising panel in a boom lift on a breezy day, within the machine’s wind limit. What is the main extra risk?
Question 17An operator is pinned between the platform and a roof beam. You are the trained ground person. Which action comes first?
Question 18According to HSE guidance GS6, what is the first choice of control when work must be done near an overhead power line?
Question 19Your boom touches an overhead line and the machine is now live. The platform controls still work. What do you do?
Question 20In the 2020 Devon biogas incident reported by HSE, what did the cherry picker strike?
Question 21A boom lift stops at height and will not respond to the platform or ground controls. The operator suggests climbing across to a nearby roof. What should the ground person do?
Question 22Under RIDDOR in Great Britain, which MEWP event is reportable as a dangerous occurrence even if nobody is hurt?
Question 23While working at height, a gust makes your scissor lift sway sharply, then it settles. Nobody is hurt and the work is nearly finished. What should you do?
Question 24At the end of the shift, where and how should you leave the MEWP?