Mobile Elevating Work Platforms (MEWP) Safety
Understand MEWP types and legal duties, plan the job, run pre-use checks, avoid overturning, falls, entrapment and power lines, and know what to do when a platform fails at height.
What you will learn
- Identify MEWP groups, types and categories and explain the training, authorisation and inspection duties that apply.
- Plan MEWP work: choose the right machine, assess the ground, set up an exclusion zone and prepare a rescue plan.
- Carry out a pre-use inspection and function test, including ground and emergency controls, and act on defects.
- Operate within the machine’s limits to prevent overturning and falls from the platform.
- Control overhead hazards: entrapment and crushing against structures, and contact with overhead power lines.
- Respond to emergencies, carry out a planned rescue and report incidents and near misses.
Modules
- MEWP types, the law and who may operate
- Planning the job and setting up
- Pre-use inspection and function tests
- Stability, loads and staying in the platform
- Overhead hazards: entrapment and power lines
- Emergencies, rescue and reporting
Course facts
- Level
- Awareness
- Estimated study time
- about 45 minutes
- Final assessment
- 24 questions · Pass mark 80%
- Available in
- English, Français, العربية
- Price
- Free. Optional verifiable certificate: $5
- Last updated
- Published by
- AMAADOR ACADEMY
Who this course is for
MEWP operators and ground staff, supervisors, site managers, facilities and maintenance teams, event and arboriculture crews, and HSE staff who plan or check work from scissor lifts and boom lifts.
Prerequisites
None. Basic reading ability in the course language. Useful if you already work at height or around plant.
Course content
1. MEWP types, the law and who may operate
A mobile elevating work platform (MEWP) is a machine that lifts people, their tools and materials to a working position on a guarded platform. It has a chassis that can be moved, an extending structure (scissor pack, mast or boom) and a work platform with guardrails. In France it is called a PEMP or nacelle; in North America an aerial lift or aerial work platform. Cherry pickers, scissor lifts, spider lifts, truck-mounted booms and push-around verticals are all MEWPs.
The European design standard NF EN 280-1 (cited by INRS) sorts MEWPs by two questions.
| Code | Meaning | Typical machine |
|---|---|---|
| Group A | Platform moves vertically; its centre stays within the tipping lines | Scissor lift, vertical mast |
| Group B | Platform can move out beyond the chassis | Boom lift, truck-mounted boom, spider lift |
| Type 1 | Can travel only when stowed | Trailer or truck-mounted boom |
| Type 2 | Travels raised, driven from the chassis | Some vehicle-mounted platforms |
| Type 3 | Travels raised, driven from the platform | Self-propelled scissor or boom |
Training schemes build on these classes. The IPAF categories used worldwide are 1a (static vertical), 1b (static boom), 3a (mobile vertical, e.g. scissor) and 3b (mobile boom), with PAV for push-around verticals. In France, the CACES R486 uses category A (group A), B (group B) and C (driving a MEWP out of production, e.g. loading onto a truck).
2. Planning the job and setting up
Many MEWP accidents are decided before anyone climbs in. The Work at Height Regulations 2005 require work at height to be properly planned, supervised and carried out by competent people, and the same logic applies everywhere. Planning starts with the task, not the machine.
- Define the task — working height, outreach, load of people, tools and materials, duration, indoor or outdoor.
- Choose the machine — group A if you can position directly under the work; group B if you must reach over obstacles. Check the rated load and the platform size against what you will carry.
- Check the route and the ground — slopes, kerbs, drains, manhole covers, cellars, backfilled trenches, soft verges, floor loading inside buildings.
- Check overhead — beams, ducts, tree branches, power lines, cranes.
- Check weather limits — the maximum wind speed and slope are on the data plate and in the manual.
- Write it down — risk assessment and method statement, briefed to everyone involved.
Ground: a MEWP puts its weight on a few small points. When a boom reaches out, almost all the load can go through one or two wheels or outriggers. Use outriggers or stabilisers as the manual requires, always on suitable spreader pads, and never over a void, drain cover or freshly filled ground. If in doubt, ask for the ground bearing capacity or choose another position.
3. Pre-use inspection and function tests
Every shift, before use, the operator checks the machine against the manufacturer’s pre-use checklist. This is not the same as the periodic thorough examination. The thorough examination (LOLER in Great Britain, VGP in France) is done by a competent person at fixed intervals and recorded. The pre-use check is yours, every day, and it catches the damage done yesterday.
Start with the paperwork, then walk round the machine from the ground up.
| Area | What to look for |
|---|---|
| Documents | Manual on board; in-date thorough examination report or sticker; previous defects closed |
| Tyres, wheels, tracks | Cuts, bulges, missing wheel nuts, correct type (some MEWPs need foam-filled or non-marking tyres) |
| Outriggers and pads | Cracks, leaks, bent legs, pads present and undamaged |
| Chassis and structure | Cracked welds, bent scissor arms or boom sections, loose pins, missing covers |
| Hydraulics | Leaks, damaged hoses, fluid level |
| Batteries or engine | Charge, fuel, clean terminals, no leaks |
| Platform | Guardrails complete and secure, gate closes by itself, floor sound, anchor points intact, decals and load chart readable |
| Controls | Labels readable, guards over switches, emergency stop buttons present |
4. Stability, loads and staying in the platform
A MEWP stays upright only while the combined centre of gravity of chassis, structure, platform and load stays inside its tipping lines, the lines joining its wheels or outriggers. Anything that pushes the centre outward, or moves a tipping line inward, brings it closer to overturning.
| Cause | What it does | Control |
|---|---|---|
| Overload | Too many people, tools or materials for the rated load | Read the load plate; count people, tools and materials; respect the load-sensing alarm |
| Side force | Pulling or pushing on a structure, drilling sideways, winching | Stay within the manual force on the plate; never use the platform as a crane or anchor |
| Wind | Pushes the platform and anything with a large surface | Respect the wind limit; no sheets, panels or banners unless the manual allows |
| Ground failure | A wheel or outrigger sinks into soft ground or a void | Assess ground, use pads, avoid covers and trenches |
| Slope, potholes, kerbs | A drop of a few centimetres under one wheel becomes a large lean at height | Drive only on surfaces allowed by the manual; check the route; drive slowly |
| Impact | A vehicle or crane strikes the machine | Exclusion zone, traffic management |
5. Overhead hazards: entrapment and power lines
Entrapment happens when the platform moves towards a fixed object, such as a beam, a ceiling, a duct, a door frame or a tree branch, and the operator is pushed against it or forced down onto the control panel. If the body presses on the controls, the machine can keep moving in the same direction. The result can be crushing of the chest, neck or head within seconds.
Typical moments: raising a scissor lift under a roof or ceiling; slewing or raising a boom among steelwork; reversing or driving elevated under a beam the operator cannot see; working inside a structure where the platform is close to members on several sides.
- Plan the approach — know where every overhead and side obstruction is before you rise. Choose a position that avoids working with your back to steel.
- Look before every movement — in the direction of travel and above you. Move slowly in the last metre.
- Keep your body out of the gap — never lean over the controls or the guardrail towards an obstruction while moving.
- Use secondary guarding where needed — many machines can be fitted with devices that stop movement or sound an alarm when the operator is pushed onto the controls. The risk assessment decides if you need one.
- Brief the ground person — they must know how to stop the machine and move the platform away from the obstruction using the ground controls.
6. Emergencies, rescue and reporting
Machines fail: a hydraulic fault, a flat battery, a tripped safety sensor, an engine that will not restart. People also fall ill or get injured at height. The rescue plan written at the planning stage is what you now follow, calmly and in order.
- Stay in the platform — it is the safest place. Keep your restraint lanyard attached in a boom.
- Try the platform controls again — check the emergency stop is released, the foot switch is pressed, the load and tilt alarms are clear. Some machines have an auxiliary power function on the platform.
- Ground person takes over — they use the ground controls to bring the platform down, following the manual.
- Emergency or manual lowering — if powered functions fail, the trained ground person uses the manual descent valve or auxiliary pump described in the manual.
- Escalate — call the owner or hire company emergency line, bring a second MEWP for transfer if the plan allows it, and call the emergency services for any injury.
Case: On 25 January 2024 in Derby, a tree surgeon was working from a MEWP basket when the machine stopped while raised; nobody on site could lower it safely, so he tried to abseil out and fell more than 30 feet, suffering life-changing back injuries · HSE found no suitable risk assessment for the work at height, no rescue plan and staff not properly trained on the equipment · The company was fined £20,000 and its director, who was supervising, £1,000, in December 2025 (HSE press release, 9 December 2025).
The full lesson continues in the interactive course on this page.
Sources and references
- Nacelles et plates-formes élévatrices (MEWPs: groups and types under NF EN 280-1)
- Lifting Operations and Lifting Equipment Regulations 1998 (LOLER), regulation 9: thorough examination
- 29 CFR 1926.453: Aerial lifts
- GS6: Avoiding danger from overhead power lines
- Press release: Council fined after man falls while installing town’s Christmas tree (scissor lift, 2025)
- Press release: Father of three electrocuted at Devon biogas site (cherry picker struck an 11,000-volt line, 2026)
- Press release: Tree specialists fined after worker falls from height (MEWP failed while raised, 2025)
- Press release: Worker killed after wall panels collapsed during cleanroom dismantling (scissor lift, 2026)
Theory and awareness only. This course does not qualify you to operate a MEWP. Operators need practical training and assessment on the category of machine (for example an IPAF PAL card in the UK or a CACES R486 in France), familiarisation on the exact model and written authorisation from their employer. Always follow the manufacturer’s manual, your site rules and local law.
All courses · Occupational Safety — Free courses, certificate $5 | AMAADOR ACADEMY