Final check — Warehouse and logistics operations: receiving, storage and despatch

Answer the 10 questions. You need 80% or more to pass. You can retry as many times as you like.

Question 1According to OSHA 1910.176, what is required of permanent aisles and passageways where mechanical handling equipment is used?Clearance is optional if operators are experiencedThey may be used as temporary storage if the exit sign is still visibleThey shall be kept clear and in good repair, and they shall be appropriately markedThey need only be marked on the first day of the month

Question 2Who is HSG76 written for, according to HSE?People with management, supervisory or other health and safety interests in warehouses and storage facilities, and it is also useful to employeesOnly sites that store packaged dangerous substancesOnly fire inspectorsOnly forklift manufacturers

Question 3A received pallet’s SSCC does not appear on the electronic advice, and a carton is crushed. What is the right first handling?Book it into good stock so the dock stays clear, and pick the crushed carton laterType a neighbouring pallet’s SSCC so the system accepts the receiptIsolate the pallet in a hold location with its documents, record the damage, and do not book it as good stockOpen all cartons and rebuild a new unknown pallet

Question 4According to the GS1 Logistic Label Guideline, what does scanning the SSCC allow you to do?Authorise a person to drive a truckReplace the need for any electronic messageMatch the physical movement of the unit with the electronic business messages that refer to itProve the unit is undamaged

Question 5What is the only mandatory identifier on every GS1 logistic label?A unique Serial Shipping Container Code (SSCC)A weather stampAn EPC/RFID tag, which the guideline requires in all casesThe driver’s name

Question 6A logistic label is hidden by stretch-wrap and cannot be scanned. What should you do?Type the SSCC from a neighbouring pallet so work can continueInvent a short number and write it on a blank stickerStop, expose or replace the label under the site’s controlled process, then scan this unit’s own SSCCShip the unit unlabelled and mention it verbally

Question 7At the pick face two packs are torn and a neighbour location has the same product. What preserves the outgoing message?Isolate the damaged packs, and either move good units in the system then pick them, or record a shortageReuse the inbound SSCC on a mixed new palletPut the torn packs on the order so the count matches, and say nothingTake two units from the neighbour location without a system move

Question 8You build a new outgoing pallet from several inbound units. What does the GS1 guideline require for that new logistic unit?It needs its own unique SSCC, not a reused inbound SSCCAny handwritten product name is enoughIt must carry every inbound SSCC at onceIt may travel without a label if the truck driver knows the destination

Question 9Under OSHA 1910.176, how must tiered bags, containers or bundles be stored?Housekeeping rules do not apply once goods are in a rackAs high as the roof, provided someone can still climb themStacked, blocked, interlocked and limited in height so they are stable and secure against sliding or collapseLeaning against an unmarked aisle is acceptable

Question 10A cycle count expects 40 cartons; 36 are stable and 4 are in an unsafe leaning stack. What is the honest count?Guess 40 and restack the leaning cartons by climbing the rackCount the aisle pallet as if it were in the bay to make up the differenceWrite 40 so the ticket matches the systemWrite 36 confirmed and report the unsafe four as an exception, without entering the fall zone unless authorised and safe

Final check — Warehouse and logistics operations: receiving, storage and despatch

Already paid?