Hydrogen Sulphide (H2S) Awareness
Recognise where H2S occurs, read your gas monitor, respond to alarms by escaping upwind, and never become a second victim in a rescue.
What you will learn
- Identify what H2S is, its key properties and the workplaces where it occurs
- Describe the health effects of H2S at increasing concentrations and why smell cannot be trusted
- Explain the main exposure limits and what alarm levels mean for your actions
- Use and check personal H2S monitors and respond to fixed detector alarms
- Read the wind and evacuate upwind or crosswind to the correct muster point
- Recognise the breathing apparatus used for H2S and its limits
- Respond safely to a casualty, give first aid and follow permit and confined space rules
Modules
- What H2S is and where you meet it
- Health effects and why your nose lies
- Exposure limits and alarm levels
- Detecting H2S: personal monitors and fixed detectors
- Wind, escape routes and muster points
- Breathing apparatus for H2S
- Rescue, first aid, permits and confined spaces
Course facts
- Level
- Awareness
- Estimated study time
- about 50 minutes
- Final assessment
- 28 questions · Pass mark 80%
- Available in
- English, العربية
- Price
- Free. Optional verifiable certificate: $5
- Last updated
- Published by
- AMAADOR ACADEMY
Who this course is for
Workers, supervisors, contractors and visitors in oil and gas production, drilling, refineries, gas plants, wastewater treatment, sewers, tanneries, pulp mills and farms with manure storage, in the GCC, Morocco and worldwide.
Prerequisites
None. Basic reading in the course language. Knowing your site's emergency plan helps.
Course content
1. What H2S is and where you meet it
Hydrogen sulphide (H2S, also spelled hydrogen sulfide) is a toxic gas made when organic matter rots without oxygen, and found naturally in crude oil and natural gas. Oil and natural gas that contain it are called sour (sour gas, sour crude). It has caused many sudden deaths at work, often of several people in the same incident.
You cannot rely on seeing it or, beyond low levels, smelling it. That is why every worker on an H2S site must know its properties by heart.
Five properties every H2S worker must remember.
| Property | What it means for you |
|---|---|
| Colourless | A gas cloud is invisible. A clear sky tells you nothing. |
| Rotten-egg smell | Noticed at very low levels, but the smell disappears at dangerous levels (olfactory paralysis). |
| Relative density 1.19 (NIOSH) | Slightly heavier than air: it collects in pits, cellars, trenches, tank bottoms and low ground when air is still. |
| Flammable, 4.0% to 44% in air (NIOSH) | A large release can ignite. Burning H2S produces sulphur dioxide (SO2), also toxic. |
| Dissolves in water and oil | Sour water and sludge can release gas when stirred, heated, pumped or acidified. |
| Corrosive to steel | It can weaken pipes and vessels and cause leaks over time. |
2. Health effects and why your nose lies
H2S blocks the body's ability to use oxygen in its cells, in a similar way to cyanide. It also irritates the eyes and lungs. The higher the concentration, the faster and more severe the effect. Concentrations are measured in ppm (parts per million): 10 000 ppm equals 1% in air.
The table below is based on the effects published by OSHA. Individual reactions vary, so treat every reading above your alarm level as serious.
| Concentration (ppm) | Typical effects (OSHA) |
|---|---|
| 0.01 – 1.5 | Odour threshold: the rotten-egg smell first becomes noticeable to some people |
| 2 – 5 | Prolonged exposure may cause nausea, watery eyes, headache and poor sleep |
| 20 | Possible fatigue, loss of appetite, headache, irritability, poor memory, dizziness |
| 50 – 100 | Eye and respiratory tract irritation after about 1 hour |
| 100 | Coughing, eye irritation, loss of smell after 2–15 minutes; drowsiness and altered breathing after 15–30 minutes |
| 100 – 150 | Loss of smell (olfactory fatigue or paralysis) |
| 200 – 300 | Marked eye and lung irritation; risk of fluid in the lungs (pulmonary oedema) |
| 500 – 700 | Staggering and collapse within about 5 minutes; death after 30–60 minutes |
| 700 – 1000 | Rapid unconsciousness, "knockdown" within 1–2 breaths, breathing stops, death within minutes |
| 1000 – 2000 | Nearly instant death |
3. Exposure limits and alarm levels
Exposure limits tell your employer how much H2S workers may breathe without expected harm. They are not a line between "safe" and "dead": they are management limits that keep exposure well below the levels that cause injury.
Words you will see
- TWA (time-weighted average): the average over a working day, usually 8 hours.
- STEL (short-term exposure limit): the average over 15 minutes.
- Ceiling (C): a level that must not be exceeded at any time.
- IDLH: immediately dangerous to life or health; escape-only conditions without supplied air.
| Body | Limit for H2S |
|---|---|
| ACGIH (TLV, 2010) | 1 ppm TWA · 5 ppm STEL |
| HSE UK (EH40 WEL) | 5 ppm 8-hour TWA · 10 ppm STEL |
| NIOSH (REL) | 10 ppm ceiling (10 minutes) · IDLH 100 ppm |
| OSHA general industry (PEL) | 20 ppm ceiling; peak of 50 ppm allowed once for up to 10 minutes per shift if there is no other measurable exposure |
| OSHA construction | 10 ppm TWA |
The ACGIH values are the most protective and are used by many international operators, including in the Gulf, in their company standards. In Morocco, France and elsewhere the national law and your employer's HSE standard set the binding values. Ask your supervisor which limits and alarm levels apply on your site.
4. Detecting H2S: personal monitors and fixed detectors
A personal H2S monitor is a small electronic detector worn on your body. It measures the gas continuously and alarms with sound, light and vibration. On H2S sites it is mandatory personal protective equipment, like your helmet. Some sites use multi-gas monitors that also measure oxygen, flammable gas and carbon monoxide.
Wear it in the right place
Clip it in your breathing zone: on the collar, chest or shoulder strap, within about 25 cm (10 inches) of your nose and mouth. Never inside a pocket or under a coverall.
Check it before every use
- Inspect — case undamaged, sensor inlet clean and uncovered, clip secure.
- Switch on in clean air — let it complete its self-test and zero only in air known to be free of H2S.
- Check the display — battery charged, no fault message, calibration date not overdue.
- Bump test — expose it briefly to a known test gas, following the maker's instructions, and confirm that it alarms.
- Record and report — log the bump test; if it fails, take the monitor out of use and get a replacement.
5. Wind, escape routes and muster points
When H2S is released outdoors, the wind carries it. Your escape depends on knowing where the wind is coming from before an alarm sounds. H2S sites usually have several windsocks placed so that at least one is visible from every work area.
Do this at the start of every task and whenever the wind changes.
Key words
- Upwind: the side the wind is coming from. Gas is blown away from you. This is where you want to be.
- Downwind: the side the wind is blowing toward. Gas comes to you. Avoid it.
- Crosswind: at right angles to the wind. Use it to get out of a gas plume when you cannot go straight upwind without passing the leak.
A windsock is like an arrow: the wide open end points to where the wind comes from, and the narrow tail points downwind.
When the air is still
On calm days, at night, or in valleys and wadis, H2S may not disperse. Because it is heavier than air, it can flow into and stay in low areas: pits, cellars, trenches, bunds and depressions. Move to higher ground as well as upwind.
6. Breathing apparatus for H2S
Where H2S concentrations can be high or unknown, workers need supplied air: clean breathing air from a cylinder or an air line, not filtered site air. NIOSH lists only pressure-demand self-contained or supplied-air apparatus (with an escape cylinder) for H2S concentrations above the IDLH of 100 ppm.
| Type | How it works | Typical use |
|---|---|---|
| SCBA (self-contained breathing apparatus) | Cylinder on the back, full face mask, positive pressure. Usually about 30 minutes of rated duration, often less under hard work. | Entry into gas areas, rescue, emergency response |
| Airline (supplied-air) set with escape cylinder | Air from a trolley or cascade system through a hose, plus a small cylinder to escape if the supply fails. | Longer planned work in H2S areas, tank and vessel work |
| Escape set (emergency escape breathing device) | Hood or mask with a small cylinder giving a few minutes of air. | Escape only, never for work or rescue |
| Filter (air-purifying) respirator | Cleans site air through a cartridge. Gives no oxygen and has limits. | Not for H2S entry, emergencies or unknown levels unless your employer's assessment allows it for a specific low-level task |
7. Rescue, first aid, permits and confined spaces
The most painful pattern in H2S incidents is the chain of deaths: one worker collapses, a colleague rushes in to help and collapses too, then a third. NIOSH has reported that around 60% of the people who die in confined spaces are would-be rescuers. Your instinct to help is human, but without breathing apparatus you will not save anyone.
Case: In January 2017 in Key Largo, Florida, three contractor workers died one after another in a 15-foot (about 4.5 m) drainage hole; Monroe County authorities reported hydrogen sulphide and methane in the hole. A volunteer firefighter who went in after them was also overcome and hospitalised. OSHA later cited the contractor and a related company for 10 serious violations, including failing to purge and ventilate the space and to provide rescue equipment · Prevention: atmospheric testing before and during entry, confined space training, and a planned rescue with breathing apparatus and retrieval equipment, so nobody enters unprotected.
Do
- Raise the alarm immediately and call the site emergency team.
- Stay upwind and keep others back.
- Use the planned rescue: retrieval line, tripod and winch from outside if available.
- Enter only if you are trained, wearing supplied-air BA, with a standby person outside.
The full lesson continues in the interactive course on this page.
Sources and references
- Hydrogen Sulfide — Safety and Health Topic (hazards, standards, evaluating exposure)
- Hydrogen Sulfide — Hazards (concentration and effects table)
- NIOSH Pocket Guide to Chemical Hazards — Hydrogen sulfide
- Aghorn Operating Inc. Waterflood Station Hydrogen Sulfide Release (Odessa, Texas, 2019)
- Georgia-Pacific Corp. Hydrogen Sulfide Poisoning (Pennington, Alabama, 2002)
- EH40/2005 Workplace exposure limits
- Confined spaces — guidance and the Confined Spaces Regulations 1997
- API RP 49 (drilling and well servicing operations involving H2S) and API RP 55 (producing and gas processing operations involving H2S)
Awareness (theory) training only. Most oil and gas, refinery and wastewater sites require an H2S certificate that includes a practical session with an approved provider: donning breathing apparatus, using your gas monitor and practising escape and rescue. This online course does not replace that practical session, site induction, respiratory fit testing or your employer's authorisation.
All courses · Occupational Safety — Free courses, certificate $5 | AMAADOR ACADEMY