Customize this training

Get a certificate — $16.67$5

Hand-Arm Vibration (HAV) Awareness

Hand-Arm Vibration (HAV) Awareness

Recognise vibrating-tool risks and early HAVS signs, estimate daily exposure with the points system, apply practical controls and know the 2.5 and 5 m/s² legal values.

What you will learn

  • Identify the tools, tasks and conditions that expose hands and arms to harmful vibration.
  • Describe hand-arm vibration syndrome and carpal tunnel syndrome and recognise their early signs.
  • Explain the exposure action value, the exposure limit value and the main employer and worker duties.
  • Estimate daily exposure using A(8), exposure points and trigger times.
  • Apply the hierarchy of control to reduce vibration exposure at the source and through work organisation.
  • Take part in health surveillance, report symptoms and follow safe daily habits with vibrating tools.

Modules

  1. Where hand-arm vibration comes from
  2. What vibration does to the body
  3. The legal values and who must do what
  4. Estimating your daily exposure
  5. Controlling vibration exposure
  6. Health surveillance, reporting and daily habits

Course facts

Level
Awareness
Estimated study time
about 45 minutes
Final assessment
24 questions · Pass mark 80%
Available in
English, Français
Price
Free. Optional verifiable certificate: $5
Last updated
Published by
AMAADOR ACADEMY

Who this course is for

Operators of hand-held and hand-guided power tools (construction, groundworks, grounds maintenance, foundries, fabrication, mining, motor trades, forestry), their supervisors and HSE coordinators.

Prerequisites

None. Basic reading ability in the course language.

Course content

1. Where hand-arm vibration comes from

Hand-arm vibration (HAV) is vibration that passes from a powered tool, a hand-guided machine or a vibrating workpiece into the hands and arms. HSE UK describes the people at risk as those who frequently and regularly use hand-held power tools, hand-guided powered equipment, or hold materials that a machine is processing (leaflet INDG175).

Typical sources of hand-arm vibration.

INRS groups the sources in three families:

  • Portable machines held in the hands: angle grinders, concrete breakers, rotary hammers, impact wrenches, needle scalers, chipping hammers, chainsaws.
  • Hand-guided machines: vibrating plates, rammers, pedestrian mowers, floor saws.
  • Workpieces held by hand against a machine: polishing or grinding a casting on a pedestal grinder.

The sectors are wide: construction and groundworks, road repair, grounds maintenance, forestry, foundries and fettling, shipyards, mining and quarrying, motor repair, and also less obvious places such as hospital plaster rooms, where cast saws are used every day.

Not every tool is a problem. Occasional, short use of a small low-vibration drill is unlikely to harm anyone. The risk comes from high vibration, long daily use, or both, repeated over months and years.

2. What vibration does to the body

Regular exposure to hand-arm vibration can cause hand-arm vibration syndrome (HAVS) and carpal tunnel syndrome (CTS). HSE UK names both in its guidance and both are reportable diseases under RIDDOR when the work involves regular use of vibrating tools. In France, some of these conditions can be recognised as occupational diseases under table 69 of the general scheme and table 29 of the agricultural scheme (INRS).

The three parts of HAVS

ComponentWhat happensWhat the worker notices
VascularBlood vessels in the fingers go into spasmFingertips turn white (vibration white finger), then red and painful as blood returns, often in cold or wet weather
Neurological (sensorineural)Nerves in the fingers are damagedTingling, numbness, poor sense of touch, trouble with small objects such as screws or buttons
MusculoskeletalMuscles, tendons, joints and bones are affectedLoss of grip strength, pain in hands, wrists or elbows

Carpal tunnel syndrome is pressure on the median nerve at the wrist. It causes tingling, numbness and pain in the thumb and first fingers, often at night, and weakness of the hand.

3. The legal values and who must do what

In Europe the rules come from Directive 2002/44/EC on vibration. Great Britain applies it through the Control of Vibration at Work Regulations 2005, and France through articles R. 4441-1 to R. 4447-1 of the Code du travail. All three use the same two values for hand-arm vibration, expressed as a daily exposure normalised to an 8-hour day, written A(8).

ValueDaily exposure A(8)HSE pointsWhat it means
Exposure action value (EAV)2.5 m/s²100Above it, the employer must put in place a programme of technical and organisational measures to reduce exposure
Exposure limit value (ELV)5 m/s²400Must not be exceeded on any day

The action value is not a safe level. The duty to reduce exposure to as low as reasonably practicable applies at every level, and the action value is the point where a formal control programme and health surveillance become required.

Employer duties (summary)

  • Assess the vibration risk (with measurement if needed), using a competent person, and record the findings (in France, in the document unique).
  • Eliminate or reduce exposure, with a control programme above the action value.
  • Keep exposure below the limit value; if it is exceeded, act at once to bring it down, find the cause and change the measures.
  • Provide information, instruction and training to exposed workers.
  • Provide health surveillance for workers at risk.
  • Review the assessment when work, tools or health findings change.

4. Estimating your daily exposure

Daily exposure combines two things: the vibration magnitude of the tool (a, in m/s²) and the trigger time (T, in hours of actual contact). The result, A(8), is the steady level that would give the same dose over 8 hours:

A(8) = a × √(T ÷ 8)

Square roots are awkward on site, so HSE UK uses exposure points. Points increase in a straight line with time, so they can simply be added up across tools and tasks.

  • Points = 2 × a² × T (hours)
  • 100 points = action value (2.5 m/s² A(8))
  • 400 points = limit value (5 m/s² A(8))
Tool magnitudePoints per hourTime to reach action valueTime to reach limit value
2.5 m/s²12.58 hmore than 24 h
5 m/s²502 h8 h
10 m/s²20030 min2 h
20 m/s²8007.5 min30 min

Look at the pattern: doubling the magnitude multiplies the dose by four. A tool that vibrates at 20 m/s² reaches the limit value in half an hour. This is why choosing a lower-vibration tool is so powerful.

5. Controlling vibration exposure

Controls follow the usual hierarchy. The most effective ones remove the vibration or keep hands away from it; personal measures come last.

  1. Eliminate — change the method so no vibrating tool is needed: diamond core drilling or bursting instead of breaking, crushing pile heads hydraulically instead of using a breaker, designing out on-site cutting and chasing.
  2. Mechanise or remote-control — put the tool on a machine: breaker on an excavator arm, remote-controlled demolition robot, drill rig, jigs or manipulators that hold the work instead of hands.
  3. Choose lower-vibration tools — compare declared values for the same task, choose suitably powered tools, and use anti-vibration handles or suspended mounts that the manufacturer designed in.
  4. Maintain — sharp chisels and bits, balanced discs, replaced worn bearings and mounts, correct air pressure; include vibration in the maintenance plan.
  5. Reduce time — limit trigger time, rotate jobs between trained workers, plan breaks.
  6. Protect the person — warm clothing, information, training and health surveillance.

INRS lists the same measures in French law: work methods that lower exposure, choosing the least-vibrating ergonomic equipment, maintenance, workstation design, training, limiting duration and intensity, rest periods, and protection against cold and damp.

6. Health surveillance, reporting and daily habits

Health surveillance finds HAVS early, while exposure can still be changed. In Great Britain it is required for workers likely to be regularly exposed at or above the action value, and for workers at particular risk even below it, for example someone already diagnosed with HAVS who still uses vibrating tools (HSE L140).

HSE guidance L140 describes a tiered approach run by occupational health professionals:

TierWhat happensWho
1Short baseline questionnaire before or on starting vibration workEmployer or OH service
2Short annual screening questionnaireEmployer or OH service
3Clinical assessment when symptoms are reportedOccupational health professional (often a nurse)
4Formal diagnosis and fitness adviceOccupational health doctor
5Optional standardised tests to support the diagnosisSpecialist

In France, every employee has an initial visite d’information et de prévention within 3 months of starting the job, and the occupational health service adapts follow-up to the risks; the occupational physician’s findings feed back into the employer’s risk assessment.

Reporting the disease

  • Great Britain: under RIDDOR the employer must report HAVS and carpal tunnel syndrome when a doctor diagnoses them in writing and the work involves regular use of percussive or vibrating tools.
  • France: the worker makes the claim to the social security fund, with a medical certificate, for recognition as an occupational disease under table 69 (general scheme) or table 29 (agricultural scheme).

The full lesson continues in the interactive course on this page.

Sources and references

Awareness training only. It does not replace your employer’s vibration risk assessment, site rules, tool-specific training or health surveillance by a qualified occupational health professional. Legal values quoted are those of Great Britain, the EU and France; check local law where you work.

All courses · Occupational Safety — Free courses, certificate $5 | AMAADOR ACADEMY