Customize this training

Get a certificate — $12

On-the-Job Training and the Skills Matrix for Supervisors

On-the-Job Training and the Skills Matrix for Supervisors

A premium course for supervisors and team leaders on building a competent team at the workplace: what competence means under ISO 9001 and HSE guidance, breaking a job into important steps and key points, teaching it with the TWI Job Instruction four-step method, planning cover with a skills matrix, and signing people off and checking that training worked. Not an accredited qualification.

What you will learn

  • Explain competence and the supervisor’s role in building it.
  • Break a job down into important steps, key points and reasons.
  • Teach a job with the TWI Job Instruction four-step method.
  • Build and use a skills matrix to plan training and cover.
  • Sign people off, keep records and check that training worked.

Modules

  1. What competence means
  2. Breaking down the job
  3. Teaching with the four steps
  4. The skills matrix
  5. Sign-off, records and effectiveness

Course facts

Estimated study time
about 1.5 hours
Final assessment
10 questions · Pass mark 80%
Available in
English, Français, العربية
Price
Free. Optional verifiable certificate: $12
Last updated
Published by
AMAADOR ACADEMY

Who this course is for

Supervisors, team leaders, lead hands, senior technicians and charge staff who train others at work, in any sector.

Prerequisites

No formal prerequisite.

Course content

1. What competence means

The UK HSE describes competence as the combination of training, skills, experience and knowledge that a person has, and their ability to apply them to perform a task safely. Other factors such as attitude and physical ability also matter. A certificate shows that someone attended training; competence is shown by doing the job correctly, repeatedly, in real conditions — and knowing what to do when something is not normal.

ISO 9001 (clause 7.2) asks organisations to determine the competence needed for work that affects quality, to make sure people are competent on the basis of education, training or experience, to take action where they are not — training, mentoring, reassignment or hiring — to evaluate whether those actions worked, and to keep documented evidence. ISO 10015:2019 gives guidelines for managing competence and developing people, and ISO 45001 has similar requirements for health and safety.

In most organisations, the supervisor does most of this in practice. You decide who can do which task alone, you notice when someone is struggling, and you are usually the person who shows a new starter how the work is really done. That makes on-the-job training one of the highest-impact things a supervisor does: it affects safety, quality, productivity and how long people stay. HSE also stresses that people still learning need closer supervision until they are competent.

Key point: Competence is proven by doing the job correctly in real conditions, not by attendance; ISO 9001 7.2 asks you to check and record it.

2. Breaking down the job

Training Within Industry (TWI) was developed in the United States during the Second World War to train millions of new workers quickly; its Job Instruction method is still taught by the TWI Institute and widely used in lean organisations and hospitals. It begins before any teaching, with a job breakdown: a short written analysis prepared by the trainer. Experienced people do the job without thinking, so they skip the very details a learner needs.

A job breakdown has three columns. Important steps are the logical stages that advance the work — what is done, in a few words. Key points are anything in a step that could make or break the job, injure the worker or make the work easier: the ‘knack’, safety points and quality points. Reasons explain why each key point matters. A typical job has fewer than ten important steps and only a few key points per step; if there are many more, split the job into smaller jobs.

The breakdown is not a full procedure. It is the trainer’s teaching aid, and it should match the current standard procedure or standardized work. The Lean Enterprise Institute describes standardized work as the current best method, agreed by the team, that is the baseline for improvement. If people do the job differently, first agree the right way; teaching several versions guarantees variation. Also gather what you need before training — tools, materials, a safe place and time without pressure.

Key point: Prepare a job breakdown first: fewer than ten important steps, with key points (safety, quality, knack) and the reason for each.

3. Teaching with the four steps

TWI Job Instruction has four steps. Step 1, prepare the worker: put them at ease, name the job, find out what they already know, get them interested, and place them where they can see clearly. Step 2, present the operation: tell, show and illustrate one important step at a time; do it again stressing each key point; do it a third time stating the reasons. Present clearly, completely and patiently, and no more than the learner can master at once.

Step 3, try-out performance: have the learner do the job while you correct errors; then have them do it again explaining each important step, again explaining the key points, and again explaining the reasons. Continue until you know they know. Step 4, follow up: put them on their own, name who to ask for help, check frequently, encourage questions, and taper off the extra coaching. TWI’s summary line is: ‘If the worker hasn’t learned, the instructor hasn’t taught.’

The method works because it separates the job into pieces the learner can hold in short-term memory, repeats the key points several times in different ways (listening, watching, doing, explaining) and checks understanding by asking the learner to explain the reasons. It applies equally to a lathe set-up, a hand-hygiene routine, a month-end reconciliation or restoring a server from backup. Do not train during a crisis or at the end of a long shift: tired learners and rushed trainers both skip key points.

Key point: One step at a time, key points repeated, learner explains the reasons — and ‘if the worker hasn’t learned, the instructor hasn’t taught’.

4. The skills matrix

A skills matrix is a simple table: people in rows, critical tasks in columns, and a level in each cell. A common five-level scale is 0 not trained, 1 in training, 2 can do the task under supervision, 3 competent to work alone, and 4 competent and able to train others. Colour the cells and the gaps become visible at a glance: a task only one person can do, a person who has not been signed off on anything, a trainer who is about to retire.

Use the matrix to set a cover target for each critical task — many teams aim for at least three people at level 3 so that holidays, sickness and turnover do not stop the work. Then turn the gaps into a training timetable, the TWI tool for deciding who will be trained on which job by when. Prioritise by risk: tasks that are safety-critical, customer-critical or have a single point of failure first. Balance this with people’s development goals; a matrix is also a career conversation.

Keep the matrix current and honest. Update it when someone is signed off, when a procedure changes (people may need retraining), when equipment or software changes, and when someone has not done a task for a long time. Do not inflate levels to make the chart look green; auditors and incident investigators will compare the matrix with training records and with what actually happened. Display it where the team can see it, unless local data-protection rules or company policy say otherwise.

Key point: Rate each person on each critical task, aim for three competent people per task, and turn gaps into a dated training timetable.

5. Sign-off, records and effectiveness

Sign-off is the supervisor’s judgement, based on evidence, that a person can do the task alone to the standard. Good evidence includes observing the task done correctly several times without help, including a less common variation; asking the person to explain the key points and reasons; and checking the output — the part, the record, the patient chart, the change ticket. Note the procedure version, the date, who observed and any limits (‘competent on day shift only, not yet on the emergency stop test’).

Records matter because ISO 9001 asks for retained documented information as evidence of competence, and because regulators and investigators ask for it after incidents. HSE’s simple guidance for employers stresses that training should be given to new starters, when risks change and when skills need refreshing — and that people should be supervised until they are competent. Keep records simple and consistent with the skills matrix, and set refresher dates for tasks that are rarely done or safety-critical.

ISO 9001 also asks organisations to evaluate the effectiveness of the actions taken. At team level that means asking: after training, did errors, rework, near misses or call-backs on this task go down? Do people use the method when nobody is watching? Use follow-up observations and team data, not just a smile sheet. If training did not work, look first at the method, the breakdown and the time given — then at the procedure itself, which may be the real problem.

Key point: Sign off on observed, repeated, unaided performance; record it; then check results to prove the training worked.

The full lesson, case studies, scenarios and templates continue in the interactive course on this page.

Sources and references

Professional education only, not an accredited qualification and not a trainer certification. Legal training requirements for licensed or safety-critical tasks differ by country and sector; follow them and your employer’s procedures. ISO content is paraphrased from public catalogue pages.

All courses · Leadership & Professional Skills