Quality technician: inspection, measurement and nonconformity control
Quality technician: inspection, measurement and nonconformity control
A hands-on course for quality technicians and inspectors: where inspection fits in an ISO 9001 system, measurements you can trust through calibration, traceability and uncertainty, lot acceptance sampling, control of nonconforming product, and turning defects into corrective action. Five modules, each with a worked example, and a 10-question final quiz. Based on cited public standards pages and the NIST/SEMATECH e-Handbook. Not an accredited qualification.
What you will learn
- Explain and apply: Place incoming, in-process and final inspection within an ISO 9001 quality system.
- Explain and apply: Make measurements you can trust using calibration, traceability and uncertainty.
- Explain and apply: Apply a lot acceptance sampling plan and explain its risks.
- Explain and apply: Identify, segregate, record and disposition nonconforming product.
- Explain and apply: Turn a defect into containment, root-cause analysis and verified corrective action.
modules
- Inspection in a quality system
- Measurements you can trust
- Lot acceptance sampling
- Control of nonconforming product
- From defect to corrective action
Practical education only. It is not an accredited qualification and does not replace your organisation’s procedures, customer requirements or the standards themselves. Figures in worked examples are illustrative.