Customize this training

Get a certificate — $12

Risk, Internal Control and Compliance for Managers

Risk, Internal Control and Compliance for Managers

A premium course for managers who own processes, people and budgets: managing risk in the unit with ISO 31000, designing practical controls with the COSO internal control framework, understanding the manager’s place in the IIA Three Lines Model, spotting fraud risk using ACFE research, and handling compliance obligations and concerns raised by staff in line with ISO 37301 and the EU Whistleblowing Directive. Not an accredited qualification.

What you will learn

  • Identify, assess and treat the main risks to a unit’s objectives.
  • Design preventive and detective controls using the COSO components.
  • Explain the manager’s first-line role in the IIA Three Lines Model.
  • Recognise fraud risk factors and red flags.
  • Manage compliance obligations and respond properly when someone raises a concern.

Modules

  1. Managing risk in your unit
  2. Internal control basics
  3. The Three Lines Model and the manager
  4. Fraud risk for managers
  5. Compliance obligations and speaking up

Course facts

Estimated study time
about 1.5 hours
Final assessment
10 questions · Pass mark 80%
Available in
English, Français, العربية
Price
Free. Optional verifiable certificate: $12
Last updated
Published by
AMAADOR ACADEMY

Who this course is for

Line, department and site managers, process owners and supervisors moving into management, in any sector.

Prerequisites

No formal prerequisite.

Course content

1. Managing risk in your unit

ISO 31000 defines risk as the effect of uncertainty on objectives. For a manager, that means starting from your unit’s objectives — deliver the service, stay safe, stay within budget, meet legal obligations — and asking what could stop you, or help you, achieve them. A risk that is not linked to an objective is usually a worry, not a managed risk.

Describe each risk as cause, event and consequence: “Because only one person knows the payroll system (cause), payroll could fail when she is absent (event), so staff are paid late and we breach contracts (consequence).” Rate likelihood and impact on a simple scale, for example 1 to 5, using the organisation’s definitions so that ratings are comparable. Give each risk a named owner who has the authority to act.

Then choose a treatment: avoid the activity, reduce likelihood or impact with controls, share the risk (insurance, contracts), or accept it consciously within the organisation’s appetite. Keep your register short — ten to fifteen real risks is plenty for a unit — and review it quarterly and after incidents, audits or major changes. A long register that nobody reads is a sign of process, not of risk management.

Key point: Start from objectives, write cause–event–consequence, name an owner, and keep the register short and current.

2. Internal control basics

Internal control is the set of processes, carried out by people at every level, that gives reasonable assurance an organisation will achieve its objectives for operations, reporting and compliance. The COSO Internal Control — Integrated Framework (2013) organises it into five components, supported by 17 principles: the control environment (integrity, structure, competence and accountability), risk assessment, control activities, information and communication, and monitoring activities.

Control activities are what managers design and run. Preventive controls stop problems before they happen: approval limits, system access rights, segregation of duties, checklists, physical locks. Detective controls find problems afterwards: reconciliations, exception reports, stock counts, reviews of overtime or expense claims. A sound process usually has both, and the strongest control is often segregation: the person who requests or records a transaction should not also approve it or reconcile it.

Controls must be proportionate and evidenced. A control nobody performs, or performs without leaving a trace, gives no assurance. For each key control, know who does it, how often and what evidence is kept — a signed reconciliation, a system log, a dated checklist. When people are absent or the team is small, use compensating controls such as a manager’s review of transactions or a monthly check by someone outside the process.

Key point: Combine preventive and detective controls, separate duties, and keep evidence that each key control ran.

3. The Three Lines Model and the manager

The Institute of Internal Auditors’ Three Lines Model (2020) describes roles rather than rigid layers. The governing body is accountable to stakeholders for oversight. Management carries first-line roles — delivering products and services and managing the risks that come with them — and second-line roles that provide expertise, support, monitoring and challenge on risk matters, such as risk, compliance, health and safety, quality or information security functions. Internal audit, the third line, provides independent and objective assurance and advice.

For an operational manager, the key point is that you are first line: you own the risks in your processes and the controls that manage them. Second-line specialists set frameworks and advise; they do not own your risks. Internal auditors test and report; they are not a substitute for your own checks. Treating compliance or audit as ‘the people who handle risk’ is the most common misunderstanding of the model.

The 2020 update stresses collaboration and alignment rather than defence. In practice, involve second-line colleagues early when you design a process, share incidents and near misses openly, and treat audit findings as free advice. When an audit finding recurs, it usually means a first-line control has not been embedded in daily work.

Key point: You are first line: you own your risks and controls; second line advises and challenges; internal audit assures.

4. Fraud risk for managers

The Association of Certified Fraud Examiners’ 2024 Report to the Nations analysed 1,921 cases of occupational fraud from 138 countries, with total losses of more than $3.1 billion. The median loss per case was $145,000 and the typical scheme lasted about 12 months before detection. The most common way frauds were found was a tip — about 43% of cases — far ahead of internal audit or management review. Weak internal controls, or managers overriding existing controls, featured in about half of cases.

The criminologist Donald Cressey’s fraud triangle remains a useful lens: pressure (financial or work-related), opportunity (weak or overridden controls) and rationalisation (“I’ll pay it back”, “they owe me”). Managers have most influence over opportunity, through segregation of duties, approvals, reconciliations and rotation of duties, and some influence over rationalisation, through the example they set and how they treat small breaches.

ACFE research also lists behavioural red flags that often appear before a fraud is discovered, such as living beyond one’s means, financial difficulties, an unusually close relationship with a vendor or customer, and reluctance to share duties or take leave. A red flag is not proof. If you suspect fraud, do not investigate on your own or confront the person: preserve records, and report through your organisation’s fraud or speak-up channel so that trained people can act lawfully.

Key point: Reduce opportunity with controls, watch for red flags, and report suspicions through the proper channel — never investigate alone.

Research insight: how frauds are detected (ACFE 2024). Tips detected about 43% of the 1,921 cases studied, and more than half of tips came from employees. Organisations with hotlines detected fraud faster and with smaller losses than those without. For managers, the lesson is that a trusted way to raise concerns is itself one of the strongest anti-fraud controls.

5. Compliance obligations and speaking up

ISO 37301 describes a compliance management system built around compliance obligations: the laws, regulations, permits, contracts, codes and internal policies an organisation must or chooses to meet. At unit level, a manager should know which obligations apply to their area — for example environmental permits, food hygiene, data protection, working time, anti-bribery or product standards — who owns each, how compliance is achieved and what evidence shows it.

People need to be able to raise concerns safely. The EU Whistleblowing Directive (2019/1937) requires legal entities with 50 or more workers, among others, to set up internal reporting channels, to acknowledge receipt of a report within seven days and to give feedback within a reasonable period not exceeding three months; it prohibits retaliation against people who report breaches in good faith. Many countries outside the EU have similar laws, and many organisations apply the same principles everywhere.

When someone brings you a concern, thank them, listen, and take notes of the facts. Do not promise total confidentiality you cannot guarantee, but do protect their identity as far as possible and explain what will happen next. Do not investigate serious matters yourself; pass them to the designated channel. Watch for and stop any retaliation — exclusion, unfair allocation of work, hostile comments — because how managers react determines whether anyone speaks up again.

Key point: Know your unit’s obligations and owners; when someone speaks up, listen, protect, refer and prevent retaliation.

The full lesson, case studies, scenarios and templates continue in the interactive course on this page.

Sources and references

Management education only, not an accredited qualification or legal advice. Whistleblowing, fraud and compliance rules differ by country and sector; follow your organisation’s policies and take legal or compliance advice. ISO, COSO and IIA content is paraphrased from public pages; ACFE figures are from its public 2024 report.

All courses · Quality & Operational Excellence