Customize this training

Get a certificate — $15$5

Slips, Trips and Falls Prevention

Slips, Trips and Falls Prevention

Spot slip and trip hazards, respond to spills correctly, choose suitable footwear and report near misses so that falls on the same level stop happening in your workplace.

What you will learn

  • Explain why slips and trips matter and describe how a slip or a trip actually happens.
  • Use the slip potential model to assess a floor area and find the factors you can change.
  • Apply good housekeeping and the contain, sign, clean and dry spill response.
  • Control entrances, matting, weather, lighting, stairs and changes of level.
  • Select suitable slip-resistant footwear and recognise behaviour and distraction risks.
  • Inspect walkways, report hazards and near misses, and know the main legal duties.

Modules

  1. Why slips and trips matter
  2. The slip potential model
  3. Housekeeping, spills and cleaning
  4. Entrances, weather, lighting and stairs
  5. Footwear and human factors
  6. Inspections, reporting and legal duties

Course facts

Level
Awareness
Estimated study time
about 40 minutes
Final assessment
24 questions · Pass mark 80%
Available in
English, Français, العربية
Price
Free. Optional verifiable certificate: $5
Last updated
Published by
AMAADOR ACADEMY

Who this course is for

All workers, supervisors, cleaners, facilities staff and HSE coordinators in offices, shops, warehouses, workshops, kitchens, sites and plants.

Prerequisites

None. Basic reading ability in the course language.

Course content

1. Why slips and trips matter

Falls on the same level look minor. They are not. HSE UK states that slips and trips are the most common cause of injury at work (leaflet INDG225). In France, INRS ranks falls on the same level as the second cause of work accidents, after manual handling. EU-OSHA describes them as among the most frequent accidents in every sector, from heavy industry to offices.

The injuries are real: sprained ankles and wrists, broken hips and arms, back injuries, head injuries. A slip can also be the start of a worse event: a hand thrown out into a fryer, a fall against a machine, a tumble down stairs or into a pit.

The usual suspects behind falls on the same level.

Why do they keep happening? Because people see them as bad luck or clumsiness. INRS warns that these accidents are still too often seen as inevitable and minor, when they can be serious and even fatal. In fact the causes are usually visible and predictable, and the fixes are often simple and cheap.

2. The slip potential model

HSE UK uses a simple tool to explain why a floor is slippery: the slip potential model. The chance of a slip depends on six factors working together. Change one and the risk changes.

The six factors of the HSE slip potential model.

FactorQuestions to ask
FlooringIs the surface slip-resistant when wet? Is it worn, polished, damaged?
ContaminationWhat gets on the floor: water, oil, food, dust? Where from? How often?
FootwearDo soles suit the floor and the contaminant? Are they worn?
CleaningDoes cleaning remove the contaminant, or leave the floor wet or greasy?
EnvironmentLighting, glare, noise, slopes, weather, condensation, steam.
Human factorsRushing, carrying, pushing trolleys, distraction, fatigue, unfamiliar routes.

Use the model as a checklist when you assess an area or investigate a fall. Work through every factor, not only the obvious one. A spill may be the trigger, but a floor that becomes dangerous with a little water, and staff in trainers, are part of the story too.

Then choose controls in order. The most effective is to stop contamination reaching the floor (fix the leak, cover the process, change the layout). Next, remove it quickly and properly. Then improve the floor surface. Footwear and behaviour come last: they help, but they depend on every person every day.

3. Housekeeping, spills and cleaning

Most trips are caused by things left where people walk. Good housekeeping is the simplest and cheapest control there is, and everyone takes part in it.

Do

  • Keep walkways, stairs and exits clear at all times
  • Store materials in marked areas, not in aisles
  • Route cables away from walkways, along walls or overhead
  • Use cable covers where a cable must cross a route
  • Put tools and hoses away after use
  • Pick up packaging, film and strapping straight away

Don't

  • Leave boxes or bags "just for a minute" in a corridor
  • Trail extension leads across an office floor
  • Tape cables over a walkway as a permanent fix
  • Leave drawers or cupboard doors open
  • Use fire exits or stairs as storage
  • Step over a hazard and leave it for the next person

Cables in offices

Offices have a lot of trip hazards from cables: laptop chargers, extension leads and screens moved to new desks. The fix is to plan power and data points so cables do not cross walking space. If that is not possible, use a proper cable cover or floor channel, and report the layout so it can be changed.

4. Entrances, weather, lighting and stairs

When it rains, every person and trolley coming in carries water onto the floor just inside the door. Entrances are therefore classic slip spots, especially with smooth tiles or polished stone.

Entrance matting

  • Use enough matting: a short doormat is quickly saturated in wet, busy conditions. Matting long enough for several steps on each foot removes much more of the water.
  • Choose mats that stay flat, have bevelled edges and do not slide. Curled edges become trip hazards.
  • Change or dry mats when they are saturated; a soaked mat stops working.
  • Check that mats themselves are not slippery when wet.

Outdoor routes and weather

  • Plan for ice and snow: grit or salt routes before people arrive, starting with the busiest paths, steps and slopes.
  • Keep drainage clear so water does not pool on walkways.
  • Clear wet leaves, moss and algae from paths and steps.
  • Light car parks and outdoor routes used before dawn or after dark.
  • In hot climates, watch for sand blown onto smooth floors and condensation on cold surfaces near air conditioning.

5. Footwear and human factors

Footwear is one of the six factors in the slip potential model. Where floors cannot be kept clean and dry, for example in kitchens, food factories, workshops and outdoors, the right sole makes a large difference. The wrong sole can make a safe floor dangerous.

What makes a sole grip

  • Tread pattern with channels that let liquid escape from under the shoe, right up to the edge of the heel.
  • Soft, flexible compound: softer rubber usually grips better on wet, smooth floors than hard plastic.
  • Clean tread: a sole clogged with grease or mud acts like a smooth sole.
  • Not worn: when the pattern is worn flat, especially at the heel, grip is lost.

Markings and trials

Safety footwear sold in Europe and the UK is tested to EN ISO 20345, which includes a slip-resistance test on a standard floor in the laboratory. A marking is a useful start, but it does not prove the shoe will grip on your floor with your contaminant. HSE advises trialling footwear in the real workplace and asking wearers about grip, comfort and fit before buying in bulk. Where safety footwear is needed, the employer provides it free of charge (for example in France and Great Britain).

6. Inspections, reporting and legal duties

Slip and trip hazards change by the hour: a new leak, a delivery left in an aisle, a lamp that fails. Regular inspection catches them before someone falls. OSHA 1910.22 requires walking-working surfaces to be inspected regularly and as necessary, and hazards to be corrected or guarded before people use them.

A simple walk-round checklist

AreaLook for
FloorsWet or greasy patches, leaks, worn or polished areas, damage, loose tiles
WalkwaysObstructions, cables, hoses, packaging, open drawers
EntrancesMats flat, dry and in place; water tracked inside
StairsHandrails firm, nosings visible, steps clear and lit
OutsidePotholes, ice, leaves, drainage, lighting
PeopleFootwear, rushing, shortcuts, phone use while walking

Report near misses

A near miss is a slip or trip that did not end in injury, or a hazard that nearly caused one. It is free information. Many serious falls are preceded by near misses that nobody reported: in the HSE skull fracture case, four similar accidents had happened in the same kitchen in the previous year.

  1. Make it safe — clean, move, cone off or stand guard
  2. Report it — use the site system: card, app, logbook or tell your supervisor
  3. Say where and what — exact place, cause, time, any photo
  4. Follow up — check it was fixed; report again if not

The full lesson continues in the interactive course on this page.

Sources and references

Awareness training only. It does not replace your employer’s risk assessment, site rules or task-specific training. Work at height, ladders and scaffolds need separate training.

All courses · Occupational Safety — Free courses, certificate $5 | AMAADOR ACADEMY