VDA 6.3:2023 Process Auditor: Exam Preparation
Revise the VDA 6.3:2023 questionnaire P1 to P7, the 10-8-6-4-0 scoring, the A/B/C rating and downgrade rules, and practise audit decisions before the VDA QMC exam.
What you will learn
- Describe the VDA 6.3:2023 qualification path, exam admission rules and the structure of the volume.
- Plan and conduct a risk-based process audit using the process approach, the Turtle model and objective evidence.
- Carry out a potential analysis (P1) and decide a green, yellow or red result.
- Audit project management and product and process development (P2, P3, P4), including software and procurement before SoP.
- Audit supplier management (P5) across the supply chain.
- Audit series production process steps (P6) with the sub-elements 6.1 to 6.6.
- Audit customer care, customer satisfaction and service (P7).
- Score questions 10-8-6-4-0, calculate the degree of fulfilment, apply the A/B/C and downgrade rules and report the result.
Modules
- The qualification path and the 2023 volume
- Planning and conducting a process audit
- P1 Potential analysis
- P2 to P4 Project management and development
- P5 Supplier management
- P6 Process analysis in series production
- P7 Customer care, satisfaction and service
- Scoring, rating and reporting
Course facts
- Level
- Exam preparation
- Estimated study time
- about 2 hours
- Final assessment
- 40 questions · Pass mark 70%
- Available in
- English, Français
- Price
- Free. Optional verifiable certificate: $5
- Last updated
- Published by
- AMAADOR ACADEMY
Who this course is for
Supplier quality engineers, quality managers, internal and second-party process auditors in automotive supply chains (Germany, Morocco, France, Eastern Europe, worldwide) preparing for the VDA 6.3:2023 qualification and examination.
Prerequisites
Working knowledge of IATF 16949 and the automotive core tools (APQP, FMEA, SPC, MSA, PPAP). Your own copy of VDA Volume 6.3:2023 is strongly recommended: this course explains it but does not reproduce it.
Course content
1. The qualification path and the 2023 volume
The VDA 6.3 qualification is run by VDA QMC (the quality management centre of the German automotive industry association) and its licence partners worldwide. The facts below come from the VDA QMC VDA 6.3 FAQ page, checked on 18 November 2026. Always re-check them before you book.
- Qualification course (ID 381) — "VDA 6.3:2023 Process Auditor – Qualification", four days. You pass a knowledge test and receive a certificate of qualification.
- Admission check — your application is approved before the exam. Late submission is not accepted.
- Examination (ID 382) — an audit simulation. If you pass, you receive a VDA e-certificate with a registered number.
- Repeat rule — the exam may be repeated no more than twice and must be passed no later than one year after the first attempt.
Admission requirements for the exam
| Requirement | What VDA QMC asks for |
|---|---|
| Qualification course | Certificate (or registration confirmation) for ID 381 |
| Auditor training | At least 3 days based on ISO 19011 (e.g. VDA Auditor, ID 104). IATF 1st/2nd party auditor (ID 211) alone does not count; audit experience does not replace it |
| Core tools | ID 415 or ID 417, or 2 days from another provider plus the VDA QMC Core Tools online quiz |
| Experience | At least 5 years full-time in a manufacturing company, of which at least 2 years in quality-related work (tabular CV) |
2. Planning and conducting a process audit
A VDA 6.3 process audit asks one question: is this process capable of delivering conforming product, reliably and with controlled risk? It is not a check of whether procedures exist. The 2023 edition clarifies the boundary between process and system audits.
| Audit type | Typical reference | What it judges |
|---|---|---|
| System audit | IATF 16949, ISO 9001, VDA 6.1 | Is the quality management system complete and effective? |
| Process audit | VDA 6.3 | Are the development, supplier, production and customer processes capable and under control? |
| Product audit | VDA 6.5 | Does the finished product meet its specification? |
Who uses VDA 6.3
- Internal (1st party): your own plant, for example to cover manufacturing process audits.
- Customer or supplier audit (2nd party): an OEM or Tier 1 audits its supplier, for selection (P1), during a project (P2 to P4) or in series (P5 to P7).
- Audit service providers: VDA QMC states they need the VDA 6.3 certificate qualification.
Typical triggers: new supplier or site, new technology, quality problems, customer complaints, changes to product or process, and the regular audit programme.
3. P1 Potential analysis
A potential analysis (P1) is done before a supplier is nominated. There is no series product yet for this customer, so you cannot audit the real process. Instead you judge whether the candidate has the potential to develop and produce the requested product with the required quality.
When it is used
- A new supplier is being considered for a sourcing decision.
- A known supplier offers a new site, a new technology or a product family it has never made.
- A supplier must prove it can handle a step up in requirements (for example products with integrated software).
How it is built
P1 does not have its own free list of questions. It uses selected questions from P2 to P7 that the volume marks for the potential analysis. The 2023 edition reassigned some of these questions, so always use the 2023 questionnaire and the VDA Analysis Tool 2.0.
Because the product does not exist yet, evidence comes from comparable products and processes: similar parts already in series, the project method used on other customers' programmes, the supplier's own supplier management, the capability of comparable lines and the way complaints have been handled.
4. P2 to P4 Project management and development
P2 to P4 cover the project from nomination to the handover into series. They answer: is this project organised to reach SoP with a capable product and process? The 2023 edition adds software aspects (aligned with Automotive SPICE and VDA maturity level assurance for new parts) and procurement activities before SoP.
P2 Project management: what you look for
- A project organisation with a named project manager, team, roles and authority.
- Resources planned and actually available (people, budget, test capacity), including for software.
- A project plan with milestones and quality gates that matches the customer's timeline.
- Advanced quality planning (APQP or equivalent) integrated into the plan.
- Change management: every change to product, process or schedule is assessed, approved and communicated, internally and with the customer.
- A working escalation process: risks are reported and decisions are taken in time.
P3 Planning the product and process development
- Product and process requirements are known: drawings, specifications, legal and safety requirements, customer-specific requirements, software requirements.
- Feasibility is assessed across functions before the quotation is committed.
- Plans for development and validation exist and include the supply chain.
- New in 2023: procurement is planned, so that purchased parts and services are sourced and approved in time.
5. P5 Supplier management
P5 audits how the organisation controls its own suppliers in series: raw materials, components, heat treatment, coating, logistics and other outsourced services. A supplier's problem quickly becomes your customer's problem, so P5 asks whether the risks of the supply chain are managed, not just whether purchase orders exist.
What P5 expects
- Only approved, quality-capable suppliers — a defined selection and approval process, with risk assessment and, where needed, the supplier's own process audit.
- Customer requirements passed down — drawings, special characteristics, customer-specific requirements, legal and safety requirements and software requirements reach the sub-supplier.
- Targets agreed and monitored — quality, delivery and cost targets, with regular performance reviews.
- Approvals for purchased products — first-sample or PPAP approval before series use and after every change.
- Quality of purchased products ensured — incoming inspection or other agreed controls, complaint handling with 8D, escalation of poor performers.
- Incoming goods handled and stored correctly — identification, FIFO, protection, blocking of suspect material.
- Qualified personnel — buyers and supplier quality engineers know the products, the risks and the tools.
6. P6 Process analysis in series production
P6 is the heart of most series audits. You first split production into process steps (for example: goods receipt, injection moulding, assembly, end-of-line test, packing, dispatch), choose the steps that carry the most risk, and then apply the same six sub-elements to each step. In 2023 the separate transport and parts handling evaluation (EU7) was removed, so handling is assessed within the steps themselves.
| Sub-element | Turtle leg | Typical evidence |
|---|---|---|
| 6.1 Process input | What goes in | Handover from development, correct material and quantity, storage, identification, traceability |
| 6.2 Process flow | How it runs | Control plan at the workplace, set-up release, special characteristics controlled, reaction to deviations, rework rules |
| 6.3 Human resources | Who | Qualification matrix, training on the job, responsibilities for product and process quality, staffing per shift |
| 6.4 Material resources | With what | Maintenance and tool management, capable and calibrated measuring equipment, suitable workplace and storage |
| 6.5 Effectiveness | How well | Targets for quality and output, analysis of losses, actions on scrap and downtime, internal audits |
| 6.6 Process results | What comes out | Product meets requirements, packaging and labelling correct, release and dispatch rules |
7. P7 Customer care, satisfaction and service
P7 looks at the organisation from the customer's side: what happens after the part leaves the plant. It covers delivery quality, communication, supply security, complaints and field failures, and the people who handle them.
| P7 topic | What the auditor checks |
|---|---|
| Quality requirements at delivery | Customer requirements known and met: delivery quality targets, labelling, packaging, requalification and customer-specific requirements |
| Customer care | Named contacts, customer portals monitored, regular performance reviews with the customer, information on changes |
| Supply security | Capacity planning, emergency plans for equipment, energy, IT or supplier failures, safety stock where agreed |
| Complaints and field failures | Fast containment, root cause analysis, corrective actions proven effective, lessons learned applied to other products |
| Personnel | People who handle customers and complaints are qualified and know the product and the customer's rules |
A strong P7 depends on the earlier elements. Complaint data should feed P6 (process steps to improve), P5 (supplier complaints) and new projects in P2 to P4. When you audit P7, ask to see that loop working.
P7 follows the product into the customer's hands and back.
8. Scoring, rating and reporting
Every question is scored on a five-step scale that the 2023 edition kept unchanged. The score expresses how far the question's requirements are met and proven effective, and how much risk the gaps leave.
| Points | Assessment | In practice |
|---|---|---|
| 10 | Requirements fully met | All requirements proven effective; no deviation found |
| 8 | Predominantly met | Most requirements proven; minor deviations with no special risk |
| 6 | Partially met | Requirements only partly proven; deviations with some risk |
| 4 | Insufficiently met | Most requirements not proven; serious deviations |
| 0 | Not met | Requirements not met or no evidence at all |
There is no 2 and no 9. Scores in between are not allowed, and the auditor may not add or remove questions. Use the minimum requirements and examples in the volume for each question as your yardstick.
Degree of fulfilment
For each element, the degree of fulfilment is the points achieved divided by the points possible for the questions assessed, as a percentage.
Worked example: P5 has 7 questions assessed, scored 10, 8, 8, 6, 10, 8, 10. Total 60 of 70 possible: EP5 = 60 / 70 = 85.7%.
The full lesson continues in the interactive course on this page.
Sources and references
- VDA 6.3 FAQ: qualification, examination, admission and extension
- VDA Volume 6 Part 3 Process Audit, 4th revised edition (January 2023), webshop page
- Training courses and qualifications
- ISO 19011:2018 Guidelines for auditing management systems
- International Automotive Task Force (IATF 16949)
- Takata air bag inflator recalls
- VDA QMC worldwide licence partner network
Unofficial practice course. Not affiliated with, endorsed by or sponsored by VDA or VDA QMC. VDA 6.3 is a publication and trademark of its owner. This course does not give the VDA 6.3 qualification or certificate. Check the current admission rules and exam outline on VDA QMC's website (or your licence partner's) before you book.
All courses · Quality and Operational Excellence — Free courses, certificate $5 | AMAADOR ACADEMY