Best software

Contractor management software: paper induction, portals or an EHS module?

HSE is clear that both the client and the contractor have health and safety duties, and that contractors must be competent. Compare paper induction packs, contractor portals and EHS modules against those steps.

AMAADOR Academy editorial teamPublished 7 min read3 sources

A site supervisor in a high-visibility vest handing a badge to a contractor in a hard hat at a folding table with a paper sign-in sheet.
A site induction at a construction gate, with a badge being handed over at a sign-in table. Photograph created for AMAADOR Academy. It illustrates the practice described in this article and does not depict a real incident, audit or named workplace. Changes made: resized and re-compressed (JPEG and WebP versions).

HSE’s brief guide INDG368 is aimed at businesses that use contractors. It defines a contractor as anyone you ask to do work for you who is not an employee, and it states that both you and the contractor have responsibilities under health and safety law.1 A portal or a module can help you keep the evidence of those steps. It does not transfer the duty.

HSE’s competence page is equally direct: if you use contractors, you have a responsibility to make sure they are competent.2 INDG368 tells you to identify the job and its health and safety implications, select a suitable contractor, and make enquiries about competence — the right combination of skills, experience and knowledge — in proportion to the risk and complexity of the work.1 For construction and building work, current client, designer and contractor duties sit under the Construction (Design and Management) Regulations 2015; use HSE’s current CDM 2015 material for those projects.3

Criteria that follow the official steps

  • Can you record the job you asked the contractor to do, including the health and safety information you provided?1
  • Can you show how you satisfied yourself about competence, not only that a certificate file exists?12
  • Can you record induction, information, instruction and the arrangements for supervision and cooperation?
  • If subcontractors will be used, can the contractor show how they will check those people are competent?1
  • Will the people arriving on the day actually be able to use the tool, or does the official record get typed later from a paper gate log?

Three common approaches

Paper induction and site files

A paper pack and a sign-in sheet are easy to start and work when there is no network at the gate. For occasional, low-risk work, a well-owned file can be enough.

The gaps appear when you need to show, later, which briefing someone received, whether their competence evidence was still valid, or which subcontractors were on site. Paper also makes it easy to treat a signature as proof that the person understood the risks, rather than as proof that they signed a sheet.

A contractor portal

A portal typically asks contractors to upload insurance, competence evidence and method information before arrival, and may support induction and sign-in. That can make INDG368’s “select a suitable contractor” step more visible, provided someone still reviews what was uploaded rather than ticking a folder as complete.1

Portals fail when the forms do not match the job, when small contractors cannot easily use the system, or when the site team keeps a second, unofficial list because the portal is too slow at the gate. A completed upload is not the same as a competent person on the job.

A contractor module in an EHS system

When contractor records sit beside permits, incidents, inspections and training, you can sometimes follow a person or a company across those processes. That can help with supervision and with learning from events.

It is heavier to implement, and it only helps if the site team uses the same system for the live job. A module that is complete in the office and ignored at the gate is another filing cabinet.

A construction site office desk with a visitor sign-in sheet, a white hard hat and a closed laptop by a window.
A visitor sign-in sheet in a site office. The photograph is an illustration; it does not show a real site register or real names. Photograph created for AMAADOR Academy. It illustrates the practice described in this article and does not depict a real incident, audit or named workplace. Changes made: resized and re-compressed (JPEG and WebP versions).

Side-by-side comparison

How three approaches support contractor health and safety duties. This compares categories, not named products.
CriterionPaper induction and site filesContractor portalEHS contractor module
Selecting a suitable contractorManual checks; easy to file and forgetCan collect evidence before arrival; still needs a competent reviewSame, with more chance to reuse records across jobs
Induction and attendanceSimple at the gate; weak later retrievalCan be digital; depends on access at the point of entryUseful if the same system also holds permits or briefings
Competence evidenceFolders of certificates, often outdatedUploads with expiry dates, if you configure themSame, plus links to incidents or inspections if you use those modules
Supervision and cooperationRelies on site notesOften weak unless you add site-side workflowStronger if supervisors actually work in the system
Effort to startLowMediumHigher

The official US Department of Labor film below is about effective safety committee meetings. It is not a contractor-software demonstration. It is here because consultation and cooperation are part of managing work that involves more than one employer, and a meeting record is only useful if it changes how the work is supervised.

Video: “Core Elements - Effective Safety Committee Meetings”, from USDepartmentofLabor. Press play to load a privacy-enhanced YouTube player (youtube-nocookie.com).

For a structured look at contractor and vendor occupational health and safety management, see Contractor & Vendor OH&S Management. These are independent awareness and exam-preparation courses. They are not official IRCA, ISO, NEBOSH or IOSH awards, and they are not a substitute for a licensed standard or for legal compliance.

A practical way to decide

Start with the job, the risks, and the competence you need, as INDG368 asks you to do.1 If paper already preserves that trail, a portal is optional. If you cannot show who was on site, what they were asked to do, or how you checked they could do it safely, a portal or an EHS module can help — provided a competent person still reviews the evidence.

On construction projects, follow current CDM 2015 duties as well.3 Software does not appoint a principal contractor, and a badge does not make someone competent.

Contractor management software: paper induction, portals or an EHS module?

Frequently asked questions

Who has health and safety duties when contractors are used?

HSE’s INDG368 leaflet is aimed at businesses that use contractors. It defines a contractor as anyone you ask to do work for you who is not an employee, and states that both you and the contractor have responsibilities under health and safety law.

What does “competent contractor” mean?

HSE’s competence page states that if you use contractors, you have a responsibility to make sure they are competent. INDG368 says you should satisfy yourself that the contractor can do the job safely, which means making enquiries about competence — the right combination of skills, experience and knowledge — in proportion to the risk and complexity of the work.

Is INDG368 the only law that applies on a construction project?

No. For construction and building work, HSE publishes current guidance on the Construction (Design and Management) Regulations 2015, including roles and responsibilities for clients, designers and contractors. Use that current CDM 2015 material for construction projects; INDG368 is a brief general guide on using contractors.

Sources

Every factual statement marked with a number links to the source below. Sources were retrieved on 22 November 2026; check the publisher for later revisions.

  1. Using contractors: a brief guide (INDG368) — HSE hse.gov.uk
  2. What is competence? (HSE) hse.gov.uk
  3. The Construction (Design and Management) Regulations 2015 (HSE) hse.gov.uk